A SERVICE OF

logo

2
6. Loosen two air filter/carburetor mounting screws (H), and remove air
filter case with carburetor (I). Note position of carburetor gasket before
carburetor is removed. Gasket must be installed in same position when
carburetor is reassembled to engine.
7. Remove throttle cable end (J) from carburetor throttle plate (K).
8. Disconnect ignition lead connectors in insulated coupler (L).
9. Remove ignition ground lead screw and remove ground lead (M).
10. Remove throttle cable tube from clamp (N) in base of blower frame.
11. Remove handle adjustment knob and nut, and remove old throttle
control handle assembly (O) from handle clamp.
CRUISE CONTROL KIT INSTALLATION INSTRUCTIONS
J
K
I
L
M
L
H
E
F
I
N
O