INPUT WIRING DIAGRAM—XA-5001/XA-8001
8.
BBaassss
- sets the bass boost of the
high-pass crossover to 0, 6 or 12dB
of boost.
9.
PPRRTT
(LED red) - illuminates when
the PRT (Protection) function is
active. Activates to protect the
amplifier when the temperature is
too high, the output has a DC
offset, a short was detected on the
output, or the amplifier power
cables have been improperly
connected (reverse power). If the
temperature, DC offset, or short
condition has cleared after approxi-
mately 10-seconds the amplifier
will automatically recover.
