INPUT WIRING DIAGRAM—XA-3002/XA-6002
1.
PPWWRR
(LED blue) - when illuminated
indicates that the amplifier is on.
2.
RRCCAA IInnppuuttss
(front) - accepts RCA input
from a source unit, preamplifier, or
equalizer.
3.
LLeevveell CCoonnttrrooll
(front) - continuously
adjusts from 250mV to 5V for full
power output.
LLooww--PPaassss FFrreeqquueennccyy CCoonnttrrooll
(front) -
adjusts the frequency
(50Hz–500Hz) of the low-pass
crossover.
HHiigghh--PPaassss FFrreeqquueennccyy CCoonnttrrooll
(front) -
adjusts the frequency
(50Hz–500Hz) of the high-pass
crossover.
4.
HH
II IInnppuutt
(high level input) - Accepts
1v to 10v input from the headunit’s
speaker output. The amplifier will
automatically wake-up when the
input is greater than 1V.
5.
LLeevveell CCoonnttrrooll
(rear) - continuously
adjusts from 250mV to 5V for full
power output.
NNOOTTEE::
The numbers listed below are referenced on the Input Wiring Diagram.
FRONT PANEL CONNECTIONS/CONTROLS—XA-6004