A SERVICE OF

logo

Open as PDF
next previous
a) hard drives
b) power supplies
c) server modules
5. If applicable, rotate the system feet inward and lay the system on its side on a flat stable surface, with the cover
release latch side on top.
6. Open the system.
7. Remove the following:
a) cooling shroud
b) cooling-fan assembly
c) backplane expander board
d) hard-drive backplane
e) PCIe cage
f) power distribution board
g) CMC cards
h) integrated storage controller card
8. Disconnect all cables from the system board.
9. Loosen the spring-loaded screw securing the system board handle to the chassis, and lift the handle.
10. Holding the system board handle on one side and the system board holder on the other side, lift the system board.
11. Angling the system board toward the back of the chassis to release the CMC connectors from the chassis slots,
slide the system board out of the chassis.
105