Quantity
Purpose:
To set the default print quantity. (Set the number of copies required for a specific job from the printer driver. Values
selected from the printer driver always override values selected from the operator panel.)
Va lue s :
1
*
Sets the value in increments of 1.
Available Range: 1–999
Image Enhance
Purpose:
To specify whether to enable the Image Enhance feature, which makes the boundary line between black and white
smoother to decrease jagged edges and enhance the visual appearance.
Va lue s :
Off Disables the Image Enhance feature.
On
*
Enables the Image Enhance feature.
Hex Dump
Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Va lue s :
Disable
*
Disables the Hex Dump feature.
Enable Enables the Hex Dump feature.
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Va lue s :
Disable
*
Does not print in the draft mode.
Enable Prints in the draft mode.
LineTermination
Purpose:
To add the line termination commands.
Va lue s :
Off
*
The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Understanding the Printer Menus
167
