11
ALIGNMENT INSTRUCTIONS
∑
Select Subbrightness item, adjust Subbrightness data value
to obtain normal
brightness level.
∑
Press the DISPLAY button to memorize the data.
CONTRAST
∑
Fixed value = 12
TINT
∑
Fixed value = 42
COLOR
∑
Fixed value = 15
SHARPNESS
∑
Fixed value = 38
7) FACTORY OUTGOING MODE (S12 : FACT)
∑
If you select the S12, then the set becomes factory outgoing status.
∑
You can see the OSD “ outgoing OK”
6) DIGITAL PRESET(D.P) ADJUSTMENTS(S9)
SUBBRIGHTNESS ADJUSTMENT
∑
Receive a good local channel.
∑
Enter the service mode and select service adjustment S9.
∑
You can see the OSD as shoown in below.
D.P.
BRIGHTNESS 64
CONTRAST 12
TINT 42
COLOR 15
SHARPNESS 38
MOVE ADJUST RECALL : SET
5) WHITE BALANCE ADJUSTMENT(S8)
∑
Receive a good local channel.
∑
Enter the service mode and select service adjustment S8.
∑
You can see the OSD as shown in below.
∑
Using volume up or volume down, adjust service adjustment data of RD/GD/BD and RB/GB/BB until a good gray
scale with normal whites is obtained.ALIGNMENT INSTRUCTIONS
∑
Press the DISPLAY button to memorize the data.
RD 64
BD 64
RB 128
GB 128
BB 128
MOVE ADJUST RECALL : SET
