complete regular service.
complete regular service.
Check for loose fasteners X
Check for loose fasteners X
Check for worn or damaged parts X X
Check for worn or damaged parts X X
Lubricate brush shaft bearings X
Lubricate brush shaft bearings X
Lubricate wheel bearings X
Lubricate wheel bearings X
Check for loose fasteners X
Check for worn or damaged parts X X
Lubricate brush shaft bearings X
Lubricate wheel bearings X
Check for worn or damaged parts X X
Lubricate brush shaft bearings X
Lubricate wheel bearings X
Check for worn or damaged parts X X
Lubricate brush shaft bearings X
Lubricate wheel bearings X
Check for worn or damaged parts X X
Lubricate brush shaft bearings X
Lubricate wheel bearings X
Lubricate wheel bearings X
CUSTOMER RESPONSIBILITIES
Read and follow the maintenance schedule and the
procedures listed in the maintenance section.
Clean the sweeper after each use.
Inspect for worn or damaged parts, such as brushes
• Lubricate the brush shaft bearing twice a year with a
few drops of light weight oil. See fi gure 23.
• Every two years, remove the wheels and clean the
gears found inside the wheel housing. After cleaning,
lubricate with an even coat of light grease. To remove
the wheel, pop off the hub cap using a screwdriver
and remove the lock nut and fl at washer. See fi gure
• Clean sweeper housing with a soft brush or cloth.
• Clean debris from hopper bag with a brush or broom.
• Remove any material which has wrapped around
brushes or ends of brush shaft.
• Clean the sweeper and hopper bag thoroughly to help
• To collapse the hopper bag for storage, remove the
two hopper support rods from the rear of the hopper.
always empty the hopper bag to avoid
STORAGE
MAINTENANCE
HEX BOLT FLAT WASHER
FLAT WASHER
HEX LOCK NUT
HUB CAP
SPACER
HEIGHT ADJUSTMENT SLOT
HEX BOLT
OIL BEARINGS HERE
FLAT WASHER
