28 DXZ748RMP
280-8001-01
English
● TEL :
AUX/TEL input cable is for cellular phone au-
dio input.
∗ If 2-ZONE is set on, mode can automatically
change to AUX.
∗ If 2-ZONE is set on and connect with TEL002,
TEL can be used.
4. Press the [T] button to return to the previous
mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗ The factory default setting is “MID”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“
ÅÅ
ÅÅ
Å
AUX SENS
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
“HIGH”, “MID” or “LOW”.
4. Press the [T] button to return to the previous
mode.
Setting the car speaker output for
the cellular phone
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
“
ÅÅ
ÅÅ
Å
TEL-SP
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise to select
“RIGHT” or counterclockwise to select “LEFT”.
● RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
● LEFT:
Telephone calls can be heard on the front left
speaker connected to this unit.
4. Press the [T] button to return to the previous
mode.
Setting the Subwoofer
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“
ÅÅ
ÅÅ
Å
SUB-W
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
4. Press the [T] button to return to the previous
mode.
Setting LOW PASS FILTER
∗ The factory default setting is “THRGH” (Through).
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“
ÅÅ
ÅÅ
Å
SUB-W LPF
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
THRGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4. Press the [T] button to return to the previous
mode.
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices when connected to this unit.
Selecting AUX/TEL
You can listen to sounds and music from exter-
nal devices or your telephone calls from the
speakers when connected to this unit.
When TEL INT or External device is connected to
this unit, you can select TEL mode or AUX mode.
∗ The factory default setting is “AUX”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“
ÅÅ
ÅÅ
Å
AUX/TEL
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
“AUX” or “TEL”.
● AUX :
AUX/TEL input cable is for external Audio input.
Operations Common to Each Mode
+DXZ748RMP-009-ENG 1/14/04, 11:02 AM28
