A SERVICE OF

logo

6 Cisco Small Business SLM Series Smart Switch Installation Guide
S
TEP 5 Connect the switch to network devices according to the the
installation instructions in section 4, “Connecting the Equipment”.
Getting Started with the
Configuration
Before you begin to use the Configuration Utility, make sure that you have a
computer that meets the following requirements:
Internet Explorer (version 6 or higher) or Firefox (version 3 or higher).
The Web-based configuration utility is optimized for a screen resolution
of 1024 x 768.
To get started configuring your switch, perform the following:
STEP 1 Connect a computer to an available LAN port.
STEP 2 Start a web browser.
STEP 3 In the address bar, enter the default IP address of the switch,
http://192.168.1.254 and press Enter.
3