A SERVICE OF

logo

2-5
Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide
OL-23421-02
Chapter 2 Installation
Connecting to the Network
Figure 2-4 Switch Module Installed in the CGR 2010 Router
Connecting to the Network
Connecting the Copper Switch Module, page 2-5
Connecting the Fiber Switch Module, page 2-6
Connecting the Copper Switch Module
Follow these steps to connect the switch module’s copper model (GRWIC-D-ES-2S-8PC) to the
network:
Step 1 Connect one end of the cable to one of the Fast Ethernet ports on the switch module (see Figure 2-5).
239014