2-8
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Mounting the Cisco Unified MeetingPlace 8100 Series
To Mount the Breakout Box for a T1 PRI or E1 Cisco Unified MeetingPlace System
Step 1 Locate the breakout box that shipped with the Cisco Unified MeetingPlace Audio Server.
Step 2 Locate the screws for mounting the breakout box that came with the Cisco Unified MeetingPlace Audio
Server.
Step 3 Use a screwdriver to mount the breakout box in the position directly above the Cisco Unified
MeetingPlace Audio Server in the rack, as shown in the applicable figure:
Step 4 If applicable, mount the second breakout box by repeating Step 2 and Step 3. Place the second breakout
box directly above the first breakout box. See Figure 2-7.
Figure 2-5 Mounting the Breakout Box for a Cisco Unified MeetingPlace 8106
Cisco Unified MeetingPlace 8106
See Figure 2-5.
Cisco Unified MeetingPlace 8112
See Figure 2-6.
