Contents
iv
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
OL-23803-02
CHAPTER
2 Switch Installation 2-1
Preparing for Installation 2-1
Warnings 2-1
Installation Guidelines 2-3
Equipment That You Supply 2-4
Box Contents 2-4
Powering the Switch 2-4
Verifying Switch Operation 2-5
Mounting the Switch 2-5
On a Desk or Shelf (without Mounting Screws) 2-6
Desk, Shelf, or Wall (with Mounting Screws) 2-6
Desk- or Shelf-Mounting 2-6
Under the Desk- or Shelf-Mounting 2-8
Wall-Mounting 2-10
With a Mounting Tray 2-13
Mounting Tray with Screws 2-13
Mounting Tray with a Magnet 2-15
In a Rack 2-18
Attaching Brackets to the Switch 2-18
Mounting the Switch in a Rack 2-19
On a DIN Rail 2-20
Attaching the DIN-Mount Tray to the Switch 2-20
Mounting the Switch on a DIN Rail 2-21
Removing the Switch from a DIN Rail 2-23
Installing a Cover for the Reset Button (Optional) 2-24
Installing the Power Cord Retainer (Optional) 2-25
Installing the Cable Guard (Optional) 2-28
After Installing the Switch 2-31
Installing SFP Modules 2-31
Removing SFP Modules 2-32
Connecting Devices to the Ethernet Ports 2-33
Connecting to the 10/100 and 10/100/1000 Ports 2-33
Connecting to the PoE Ports 2-34
Where to Go Next 2-35
CHAPTER
3 Troubleshooting 3-1
Diagnosing Problems 3-1
Switch POST Results 3-1
