A SERVICE OF

logo

Open as PDF
next previous
29-70
Catalyst 2960 Switch Software Configuration Guide
78-16881-01
Chapter 29 Configuring QoS
Displaying Standard QoS Information
show mls qos queue-set [qset-id] Display QoS settings for the egress queues.
show policy-map [policy-map-name [class
class-map-name]]
Display QoS policy maps, which define classification criteria for
incoming traffic.
Note Do not use the show policy-map interface privileged
EXEC command to display classification information
for incoming traffic. The control-plane and interface
keywords are not supported, and the statistics shown in
the display should be ignored.
show running-config | include rewrite Display the DSCP transparency setting.
Table 29-15 Commands for Displaying Standard QoS Information (continued)
Command Purpose