5-11
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Managing Trunk Groups and Trunks
SS7 trunk
commands
Failure • ACT_LOC_INIT_RESET—Reset circuit at startup.
• ACT_LOC_MML_RESET—Craft reset request.
• ACT_LOC_QUERY—Circuit query.
• ACT_LOC_UPU—Action to perform user part unavailable.
• ACT_LOC_VALIDATE—Circuit validation.
• ACT_LOC_COTTEST—COT test.
• ACT_LOC_STOP—Action to stop the call.
• BLK_LOC_UPU—Trunk is blocked because user part is unavailable.
• DES_LOC_GRACE—Local hardware RSIP graceful.
• DES_LOC_SIG—SS7 signaling fault (link fail).
• DES_LOC_FORCE—Local hardware RSIP forced.
• DES_LOC_MML—MML; also used for unsolicited blocks from
MDL due to circuit query reservation (CQR).
• DES_LOC_UPU—Trunk needs to be blocked because of user part
unavailability.
• JOB_PENDING—Ongoing job in progress.
• JOB_REC—Job was received by the MDL component and is being
processed.
• OPER_ACTIVE—Trunk is available for calls.
• REMOTE_GRACE—Trunk is blocked remotely because of a CLI
command on the remote switch.
• REMOTE_FORCE—Trunk is blocked remotely because of a
hardware failure on the remote switch.
• RESERVE_SPARE1—Reserved for future use.
• RESERVE_SPARE2—Reserved for future use.
• TERM_GRACE—Trunk is gracefully blocked because of an RSIP
graceful from the MGW.
Table 5-4 Understanding Trunk Group and Trunk Generic Command Responses (continued)
Command
Entered
Command
Response Possible Conditions
