A SERVICE OF

logo

Installation Instructions FHB3746
3
TOOLS / PARTS FOR INSTALLATION
ASSEMBLY AND INSTALLATION
1. Use four 5/16-18" hex nuts (B) and four flat washers (C) to
connect Fusion uprights to extender brackets (A). (See
Figure 1)
Figure 1
2. Lay display face down on a soft surface.
3. Use four M6x16mm Phillips machine screws (included with
mount) to attach extender brackets (A) to display. (See
Figure 2)
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the maximum weight
installed on the interface bracket doesn’t exceed 75 lbs (34
kg).
Figure 2
4. Complete the installation following the mount installation
instructions.
A (2)
[Extender
Bracket]
B (4)
5/16-18"
C (4)
5/16"
1
(B) x 4
(A) x 2
(C) x 4
3
x 4
(A) x 2