Q-Wash 560Z-LED QRG
Page 4 of 8
Menu Options
Selects a starting DMX address
Resets the product’s custom settings
Select the fan’s operation mode.
NOTE: Product’s controller will force the fan to High if the
product’s internal temperature becomes too high, despite any
manual or DMX setting
Selects the first automatic program
Selects the second automatic program
Selects the user customizable program
Selects the Slave running mode
Starts the product’s test sequence
Selects the 11-channel DMX mode
Selects the 15-channel DMX mode
Turns off the display after 60 seconds
Activates/deactivates the control panel password
Slow (DIM 4) to fast (DIM1) dimmer curves
Shows the version of the installed S/W
Defines the pan direction
Defines the tilt direction
Defines the direction of the dimmer fader
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
Activates the move-in black delay (3 s)
The DMX controller can reset the product
The control panel can reset the product
LEDs illuminate at normal or high intensity
NOTE: Product will return to Normal if temperature becomes too
high
White output matches that of older products
White output set by RGB-W
White output defined by RGBW faders
The DMX controller can set the fan speed
The control panel can reset the fan speed
Selects the tilt position
Selects the pan/tilt speed
Combines red, green, blue, white, and amber to obtain a custom
color
Continues in the next page
