20110901
1-2 Turning Power On and Off
Turning Power On
You can turn on the ClassPad either by pressing the
o
key or by tapping the touch
screen with the stylus.
• Turning on the ClassPad displays the window that was on the display when you last turned
it off. See “Resume Function” below.
• Note that you need to perform a few initial setup operations when you turn on the ClassPad
the first time after purchasing it. For details, see “Getting Ready” in the separate Hardware
User’s Guide.
Turning Power Off
To turn off the ClassPad, hold down the
o
key for about two seconds, or until the ending
screen appears. For details about the ending screen, see “Specifying the Ending Screen
Image” in the separate Hardware User’s Guide.
Important!
The ClassPad also has an Auto Power Off feature. This feature automatically turns the
ClassPad off when it is idle for a specified amount of time. For details, see “Auto Power Off”
in the separate Hardware User’s Guide.
Resume Function
Any time the ClassPad powers down (because you turn off power or because of Auto Power
Off), the Resume function automatically backs up its current operational status and any data
in RAM. If you turn ClassPad power back on, the Resume function restores the backed up
operational status and RAM data.
1-2-1
Turning Power On and Off
