A SERVICE OF

logo

Chapter 7 Maintenance
BES-941BC • BES-1241BC
143
e
t
r
t
q
w
3-2 Feed Guide Section
Check the X-feed linear guides (2 positions) and the Y-feed linear guides (one each on the right
and left).
(Note) When greasing, be sure to use the grease tank 30 provided with the machine.
Procedure
1. Loosen 12+2 screws q, and remove the X-
feed cover w.
2. Remove the X-feed cover e.
3. Loosen eight screws r, and remove the Y-
feed cover t from the right and left.
4. Grease the X-feed linear guides (3
positions), the Y-feed linear guides (one
each on the right and left), and the linear
guide inside the No. 3 bed. Slide the guide
to spread grease entirely.
5. After greasing, assemble in the reverse
order.