Bradyprinter 200M-e and 200M-e 300 User’s Guide 5
AOÃAÏÍÏlÍ-ÃÏlÃ
This chapter of the user’s guide is so important that we’ve printed it on a
different color paper! That way, it will be easy for you to find when you
must calibrate (set up) the printer for your particular application.
3XUSRVH
• To calibrate the printer.
• To verify that the printer is properly set up by printing a test label.
NOTE: This procedure must be performed when the printer is first
installed or if it cannot properly detect the top of the label.
To calibrate the printer, perform the following procedures:
• Determine the type of media (labels) being used.
• Choose the print method.
• Position the media sensors (if necessary).
• Configure the printer and software or driver based on the label being
used.
• Perform a media and ribbon calibration.
•Print a test label.
