A SERVICE OF

logo

Open as PDF
next previous
Printing Labels 23
The commands used for bit mapped font loading are usually generated by
font-creation software. However, the Assign Font ID Number command
must be sent to the Printer before the font file. Font Loading Commands
are listed in Table 2-6.
The following sample program is included for reference. The ASCII text
file below will generate the label shown in Figure 2-1.
Command
Character
P PR Description
*c###D N N Assign Font ID Number
### = ID Number 100 to 999
P = Must Supply Parameters?(Y/N)
PR = Printer Responds? (Y/N)
Table 2-6 Font Loading Commands
2.2 Programming Examples
<STX> L <CR>
H07 <CR>
D11 <CR>
19110080100002510K OHM 1/4 WATT <CR>
1a6210000000050590PCS <CR>
E
10K OHM 1/4 WATT
Figure 2-1 Sample Label