13
G. Connect the black single female
terminal from the main wiring harness
to the other side of the right turn signal.
H. Connect the black double female
connector of the main wiring harness to
the other side of the left turn signal and
the black wire from the taillight.
I. Connect the red double female
connector from the harness to the red
wire from the taillight and the red
wire from the brake light switch.
J. Connect the blue wire from the
brake light switch to the blue wire from the taillight.
Photo 17
Battery
Fuse
Holder
Route wires as shown in the photos for a clean and secure installation.
19. Install the fuse in the fuse block.
The wiring installation is now completed!! Proceed to the
next section to test your work
.
