Sample Upgrade Script File
198 4600 Series IP Telephone LAN Administrator Guide
## SPEAKERSTAT controls operation of Speakerphone as
## follows:
## 0 no speakerphone allowed
## 1 one-way speaker (also called "monitor") allowed
## 2 two-way speaker allowed
## The default is 2.
##
## DSCPAUD Sets the DiffServ value for audio streams from
## the phone. The default is 46 and valid values are 0-63.
##
## DSCPSIG Sets the DiffServ value for signaling protocol
## messages from the phone. The default is 34 and valid
## values are 0-63.
##
## SNTP settings are used to configure SNTP related
## parameters. SNTP is only supported on SIP telephones.
##
## SNTPSRVR sets the IP address or Fully-Qualified
## Domain Name (FQDN) of the SNTP server(s) to be used.
## The default is null ("") but valid values are zero or
## more IP addresses in dotted-decimal or DNS format,
## separated by commas without intervening spaces, to a
## maximum of 255 ASCII characters.
##
## DSTOFFSET sets the daylight savings time adjustment
## value. The default is 1 but valid values are 0, 1, or 2.
##
## DSTSTART sets the beginning day for daylight savings
## time. The default is 1SunApr2L; see the 4600 Series IP
## Telephone LAN Admin Guide for format and setting
## alternatives.
##
## NOTE:
## Starting in March 2007, the default values for DSTSTART
## and DSTSTOP are obsolete for the United States and
## Canada and must be changed via revised values in this
## file as indicated in the examples below.
##
## DSTSTOP sets the ending day for daylight savings time.
## The default is LSunOct2L; see the 4600 Series IP
## Telephone LAN Admin Guide for format and setting
## alternatives.
##
