A SERVICE OF

logo

SZ; Reviewed:
WCH 3/19/2004
Solution & Interoperability Test Lab Application Notes
©2004 Avaya Inc. All Rights Reserved.
12 of 14
3com-PoE-Config.doc
The following window is displayed:
Figure 10: Display Port 1 Power Status
Note that the power state is Disabled as shown in Figure 10.
2.
Enable inline power for port 1 and verify that the telephone receives power.
In the Port column, select port 1:1 and click Enable.
Click Refresh for the change to take effect.
Select Physical Interface -> Power -> Detail in the navigation panel.
From the Power Detail for Port drop-down box, select port 1.