NetCamera NV
Question Why does the Link LED not light up properly?
Answer
• There might be a problem with the network cable.
To confirm that the cables are working, PING the
address of a know device on the network. If the
cabling is OK and your network is reachable, you
should receive a reply similar to the following
(…bytes = 32 time = 2 ms).
• The network device utilized by the IP Security
Night Vision
Camera is not functioning properly
such as hubs or switches. Confirm the power for
the devices are well connected and functioning.
Question Why does the IP Security Night Vision Camera work
locally but not externally?
Answer
• Might be caused from the firewall protection. Need
to check the Internet firewall with your system
administrator.
• The default router setting might be a possible
reason. Need to double check if the configuration
of the default router settings is required.
Question There is bad focus on the IP Security Night Vision
Camera, what should be done?
Answer
You need to adjust the IP Security Night Vision Camera focus
manually as described in Adjust IP Security Night Vision
Camera Focus.
