A SERVICE OF

logo

Open as PDF
next previous
62
Function Timeout:
This is the time that elapses after any adjustment is made. Once the Function Time elapses, the On-Screen
text disappears and the Front Panel display becomes dim. This also applies to how long ZONE2, ZONE3,
RECORD, and HEADPHONE information is displayed before MAIN display information returns. You can set
Function Timeout between 1 and 15 seconds.
Example: Set the position of the MAIN On-Screen information to the middle of the monitor.
• Enter the Setup (section 7.1). Go to ‘10. DISPLAYS/TIMEOUT’ and press SELECT.
•Press the button until you reach ‘c. MAIN OS POS’N: Bottom’.
• Use the buttons to change to ‘Middle’.
•When finished, press  to go to another menu item, or...
•Press BACK to leave the submenu and return to the main menu.
7. SETUP MENU continued …