5/08 • 102117AE
Broadcast and Entertainment Products
90
www.adc.com • +1-952-938-8080 • 1-800-366-3891
UniPatch
®
Modular System
Bantam Audio Modules
The bantam audio jack modules for the
UniPatch
®
system are perfectly designed
for professional digital and analog audio
applications. Up to 32 modules plug into
the UniPatch chassis to provide a 64-circuit
(128 jacks) configuration when fully loaded,
matching typical router configurations. Each
module contains two circuits and four WECO-
standard precision bantam jacks designed for
long life. High-performance switches allow
flexible normalling and grounds for each circuit.
Large .440" x .325" designations provide
enough room for three lines of text.
Features
High-density, selectable normals, and excellent reliability•
33 percent higher density than conventional frame-type bantam bays. Up to 32 cards in a frame with •
2 circuits (4 jacks) per card for a total of 64 circuits (128 jacks)
32-across spacing exactly matches typical router congurations and provides larger designation area•
Switch-selectable normals and grounds for each circuit: normals strapped (NS), half-normal (HN), bussed •
ground (BG), or no normals (NN)
WECO-standard jacks meet or exceed MIL-STD-202 for mechanical durability as well as corrosion, salt spray, •
thermal shock, moisture resistance, and vibration
Precision-molded housing and sturdy, integrated all metal springs rated for 10,000 insertion/withdrawal •
cycles. Gold crossbar, self-cleaning contacts ensure a positive connection
Modular termination options: QCP II, EDAC 3-pin plug, EDAC 90-pin plug, DB-25, AMP Champ 50-pin •
receptacle, or QCP IV with 4-foot umbilical Ultra Patch panel
Snap-on designation holders accept individual labels without tools; conventional chassis-wide designation •
strips are also available. Large designations provide enough room for three lines of text
Fully compliant 110 • W circuit board meets demanding AES specications
Two circuits per card
Precision Impedance Matched DIP Switch
UniPatch
