A SERVICE OF

logo

3 - 10 ONline Ethernet 10BASE-FL Installation and Operation Guide
Figure 3-3. 10BASE-FL Module Connection
7. Make sure that the transmit and receive cables are:
Clearly marked or color coded.
Connected to the appropriate ports on the 10BASE-FL Module.
Properly cleaned with an appropriate fiber optic cleaning solution
before installation.
Note: Do not exceed the bend radius for the fiber cable when
directing the cables under the concentrator. Refer to the
cable manufacturer's specifications for minimum bend
radius.
8. Attach the other ends of the cables to either:
Another ONline 10BASE-FL Module.
An ONline 10BASE-FL Transceiver.