Filter
Top Products
6
Specifications
General specifications
Type...........................................Amplified 2Way Bass Reflex Powered Speaker (Bi-Amp.)
Crossover Frequency..................2.0 kHz, 30 dB/oct
Frequency Range .......................40 Hz to 40 kHz (–10 dB)
Sensitivity ..................................–10 dB at –6 dB position (for 100 dB/SPL, 1 m on Axis)
Maximum Output Level.............110 dB (1 m on Axis)
Dimensiones (W
×
H
×
D)..........265
×
420
×
329 mm
Weight.......................................20 kg
Speaker unit
Speaker Unit..............................LF: 20 cm Cone (4
Ω
, magnetic shielded)
HF: 2.5 cm Titan Dome (8
Ω
, magnetic shielded)
Enclosure...................................Type: Bass Reflex
Amp.unit
Maximum Output Power............LF: 120 W at 400 Hz, THD= 0.02%, RL= 4
Ω
HF: 60 W at 10 kHz, THD= 0.02%, RL= 8
Ω
Input Sensitivity/Impedance .......–6 dB to +4 dB/10 k
Ω
Hum & Noise.............................
≤
–67 dBu (Volume= Min) DIN Audio filter
Signal to Noise Ratio..................
≥
98 dB (IEC-A Weighting)
Controls.....................................TRIM Switch
LOW: 3 positions (0 dB, –1.5 dB, –3 dB at 50 Hz)
HIGH: 3 positions (+1.5 dB, 0 dB, –1.5 dB at 10 kHz)
LOW CUT Switch: ON/OFF
SENSITIVITY Control
POWER Switch: ON/OFF
Connectors ...............................Input XLR-3-31
Power Indicator/Clip Indicator ...Green/Red LED
Power Requirement....................USA and Canada: AC 120 V, 60 Hz
Europe: AC 230 V, 50 Hz
Others: AC 240 V, 50 Hz
Power Consumption...................150 W
Option.......................................Wall mounting bracket BWS251-300
Specifications and appearance are subject to change without notice.
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 11A
Conformed Environment: E1, E2, E3 and E4
Dimensions
Performance graph
Standard frequency response
61.5
D: 329
2625.5
W: 265
H: 420
85
120
2-M8 Screws
Unit: mm
10k1k100
20
FREQUENCY (Hz)
RESPONSE (dB)
–40
–30
–20
–10
0
+10