Disney DP3500-FLR Portable DVD Player User Manual


 
5
POWER SOURCES
AC CONNECTION
Insert the small end of the AC adapter into the DC IN jack on the side of the unit. Insert the other end (with the 2 blades)
into a conveniently located AC outlet having 120V
AC, 60Hz.
AC Adapter Specification : 9V DC,
zz
NOTE:
Use the enclosed
AC adapter for this product only.
T
o disconnect the AC adapter, remove it from the DC IN jack on the side of the unit as well as from the AC outlet.
CHARGING THE battery packss
Insert the small end of the AC adapter into the DC IN jack on the side of the unit. Insert the other end (with the 2
blades) into a conveniently located AC outlet having 120V AC, 60Hz and MAKE SURE THE POWER ON/OFF SWITCH
IS IN THE OFF POSITION. The CHARGE indicator will light red as the battery is charging and the FULL indicator will
light green when charging has completed. Disconnect the AC adapter plugs when the charging has finished.
NOTE: Fully charge the battery packs (5 hours) before using it for the first time.
BATTERY NOTES:
Make sure the battery packs is charged at least once a year.
When fully charged, the unit can be used for approximately 2.5 hours.
When the unit is in the Stop mode or there is no disc inserted and no button is pressed for around three minutes,
the screen saver will automatically appear in the display. If it is no button is pressed for 10 minutes, the unit will
enter the Standby mode (the display will turn of
f) and the screen saver will disappear
. Press any button to resume
and to turn on again.
BATTERY LOW INDICATOR
When the rechargeable battery packs becomes weak, the LOW BATTERY indicator will light and you will have 15 more
minutes of playing time. Charge the battery fully (3 to 3.5 hours) in this situation or use AC power.
USING THE STAND
Push in on the top of the Stand to release the Stand.
1
Carefully stand the unit.
3
Pull the Stand out.
2