Filter
Top Products
10
OPERATION (CONTINUED)
With the unit off, press the Clock
Set/Alarm Set button twice to set
the alarm time; the Alarm On
indicator and the display will blink.
1
Press the Tuning Down/Hour button
❶ to set the alarm hour and the
Tuning Up/Minute button ❷ to set
the alarm minute. Make sure the
appropriate AM/PM indicator is lit if
using the 12 hour mode. Wait 10
seconds, or press the Clock
Set/Alarm Set button ❸ again and
the time will be set.
2
3
1
2
TO SET OR RESET THE ALARM TIME
Set the alarm time as previously
instructed. Select a radio station as
described on page 8 and make sure
the Volume control is set as desired.
NOTE: To avoid having the volume
set too low that it cannot be heard
when the alarm sounds, this unit will
automatically set the volume to a
preset level as needed.
1
Press the Alarm On/Off button and
the Alarm On and Radio (Alarm)
indicators will light. When the actual
time matches the selected preset
alarm time, the radio will
automatically turn on.
To shut off the alarm, see TO SHUT
THE ALARM OFF section on the
next page.
2
TO SET THE ALARM TO WAKE TO RADIO
DCR5000.O/M.QXD 1/28/03 7:21 AM Page 10