Filter
Top Products
16
UNIDEN Model uh065sx UHF CB Radio
OPERATION
GROUP SCAN(GS) Mode
To change between OS and GS scan;
1. Press
ENT
MENU
four times.
GS setting ON or OFF will flash.
2. Press or to change
the selection.
3. Press and hold
ENT
MENU
to save
and exit.
To initiate scanning,
1. When
DUAL
is pressed during
Group Scan Mode, SCN will blink
and Group Scan Scanning begins.
2. To deactivate GS scanning, press
DUAL
, or .
1. If SCAN is deactivated while it is tuned to an active
channel, the uh065sx will stay on that active
channel. If none of the channels re- active, the
uh065sx will reinstate the Scan start channel.
2. If GS Scanning is initiated when there are no
channels programmed in GS memory, an error
tone will be heard and scanning will not start.
uh065sx OM.indd Sec1:16uh065sx OM.indd Sec1:16 17/8/07 3:00:31 PM17/8/07 3:00:31 PM