Filter
Top Products
UNIDEN Model UH-012 CB Radio
Operating the UH-012 in Duplex Mode
TX
SCAN
DUP
A S C Technology
Advanced Signal Clarity
UH012
TX
SCAN
DUP
A S C Technology
Advanced Signal Clarity
UH012
TX
SCAN
DUP
A S C Technology
Advanced Signal Clarity
UH012
6
For this example we are adopting CH01 as the channel being used in your area for repeater use.
Press to switch Duplex On. The DUP LED
is turned on.
If Duplex is not required press again to
switch Duplex off.
Only channels 01-08 are available for Duplex
Check with your local Retailer for
information on available Repeaters
The UH-012 has a scanning feature that allows you to search for active channels automatically.
Press and scanning starts.
The SCAN LED is turned on.
Scanning (open scan)
Allows continuous scanning of all channels in ascending order.
If an active channel is found, scanning will stop on that channel.
If the received signal ceases, the unit will wait 3
seconds for the signal to return, otherwise
scanning resumes.
To deactivate SCAN, press or the
PTT button on the microphone.
If SCAN is deactivated while on an
active channel, the UH-012 will stay
on that active channel. If no channels
are active, the UH-012 will reinstate
the starting channel.
Open Scan (OS) Mode
Operation