Filter
Top Products
'==
PRO501 AXLAccessories
To connect the Cigarette LighterAdapter Plug:
IMPORTANT: The CigaretteLighter Adapter Plug is designed to be used ONLY with
negative ground vehicles. Do not attempt to operate the unit with the
Adapter Plug connected to a positive ground vehicle.
1. Remove the screw from the top half of
the plug shell (Be careful not to lose
the hex nut).
2. Carefully separate the two halves
of the plug shell.
3. Strip 1/5 inch of insulation from each
wire end.
4. Crimp the terminals onto the wire
ends as shown.
t --t
~
CrImp on Insulation
i"
Black
Red
5. With the wires attached, insert the
terminals into the plug shell.
Note The black wire is inserted in the
section of the shell marked
negative (-). The red wire is
inserted into the section of the
shell marked positive (+).
6. Join the two halves of the plug shell. Secure the plug shell with the screw and hex nut.
Attaching the MagneticMountAntenna
1. Place the antenna in a convenient location on your vehicle.
2. Route the antenna cable through your vehicle's window, door, or other opening into
the interior of the vehicle.
3. Attach the antenna cable to the terminal on the rear of the PRO501 AXL.
Note: Be sure to route the antenna where it will not interfere with the operation of
your vehicle.
J