Filter
Top Products
r
I
I
i
-'-.
"- --~"""','~m
MIC/RF GAIN CONTROL DIGITAL LED CH88 INDICATOR
CLARIFIER CHANNEL INDICATOR
I
TX/RX
RF POWER/liS" METER I TWO COLOR
INDICATOR
SIGNAL,jPOWER
CHArjNEL
CH'BB TXJRX
. uniden .
BARRtACUDA
MC14700
MODE SELECTOR
2-MODE INDICATOR
VOLUME/SQUELCH
CONTROL/POWER
-SWITCH
NB/ANL
SWITCH
CHANNEL SELECTOR SWITCH
PA-TX/RX SWITCH
CH88 SWITCH
1
DUAL WATCH SWITCH
OPERATING CONTROLS
Your Barracuda designed for ease of operation, is provided with the following operat-
ing controls:
1. OFF/ON VOLUME: To turn the transceiver on, rotate the control clockwise
past click. To turn the transceiver off, rotate the control counterclockwise past
click. Rotate the control clockwise for acomfortable audio volume level.
2. CHANNEL SELECTOR: This switch is used to select anyone of the 10 Marine
Band channels. Channel 88 has been reserved by the D.O.C. for emergency
communications involving the immediate safety of life of individuals or im-
mediate protection of property. Channel 88 may also be used to render assist-
anceto a seafarer.
3. MODE SELECTOR: This switch selects AM or SSB (USB) mode of operation.
This selector changes the mode of operation of both transmitter and receiver
simultaneously.
Set the selector to the mode on which you wish to communicate. For easier
identification of the mode, LED mode indicator is provided in two different
colors, green for AM and red for SSB (USB).
4. SQUELCH: The squelch control is normally set to a position which just elimi-
nates undesired background noise with no signal present. With the audio volume
adjusted to a satisfactory level, rotate the Squelch control clockwise to the point
where the sound from the speaker is cut off. In this position, there will be no
sound from the speaker until a signal is received. In order to hear weak signals, it
may be necessary to rotate the Squelch control counterclockwise, allowing some
background noise to be heard.
-8-
- ---=r,
' ,,-.........---
r
f
._~ - -.-
---------- -