Filter
Top Products
user manual
QLight
series
TQ-440 manual
page 9
The universal FB
The universal FBThe universal FB
The universal FB-
--
-12 flybar assembly
12 flybar assembly12 flybar assembly
12 flybar assembly enables the use of
several different fixing methods, all shown in the diagram
here. The flybar is attached to to the cabinet using a pair of
captive M10 shoulder eyebolts (supplied). There are 12
attachment points equally spaced along the length of the
spine. Depending on which point is chosen for the given
attachment system, a wide range of downward inclination can
be achieved over a range of approximately 70 degrees. The
design of the flybar even allows for upwards angles, for
example for coverage of balconies that are higher than the
loudspeaker location.
The FB-12 flybar assembly comes supplied with a U
U U
U-
--
-6 Unilock
6 Unilock 6 Unilock
6 Unilock which provides a single attachment
point. The point at which the Unilock is attached to the flybar determines the vertical angle of the
loudspeaker as shown in the table following.
A pick
pickpick
pick-
--
-up point adaptor
up point adaptorup point adaptor
up point adaptor offers a further single attachment point. This option provides fast
adjustment of vertical angle. The point at which the eyebolt adaptor is attached to the flybar
determines the vertical angle of the loudspeaker as shown in the table following.
The SC
The SCThe SC
The SC-
--
-440 aluminium scaffold clamp
440 aluminium scaffold clamp440 aluminium scaffold clamp
440 aluminium scaffold clamp is attached to the T-bar by means of a simple clevis
coupler. It is designed to rotate horizontally through 360° in order to enable accurate positioning of