Filter
Top Products
2. Use the /
buttons to select MIC or Line-In and press
to confirm.
Record Quality
The quality of an audio recording can be set to Low, Medium, or High. Higher recording quality settings require
more memory space to save the recorded WAV files.
1. In the REC Settings menu, use the
/ to select the “Record Quality”
and press
.
2. Use / to switch between “Low”, “Medium”, or “High” and press to confirm.
Maximum Record Time / Quality Table
Sample rate Channels 2GB 4GB 8GB
Low (8KHz) 2 (stereo) 64 hrs 128 hrs 256 hrs
Med (16KHz) 2 (stereo) 32 hrs 64 hrs 128 hrs
FM / Line-In
Recording
High (32KHz) 2 (stereo) 16 hrs 32 hrs 64 hrs
Sample rate Channels 2GB 4GB 8GB
Low (8KHz) 1 (mono) 128 hrs 256 hrs 512 hrs
Med (16KHz) 1 (mono) 64 hrs 128 hrs 256 hrs
MIC
Recording
High (32KHz) 1 (mono) 32 hrs 64 hrs 128 hrs
Note: The above recording times may not be possible if space is limited or the battery power is low.
FM Radio and Line-In are recorded in Stereo. MIC voice recordings are recorded in Mono.
VAD (Voice Activity Detection)
VAD allows the MP330 to make gapless voice recordings. This means during voice recording with the internal
microphone, the player will only record when it detects voices. If the person(s) pauses or stops speaking, the
MP330 will temporarily stop recording until the person(s) starts speaking again. This allows for more concise,
easier to understand recordings and smaller recording files.
1. In the REC Settings menu, use
/ to select “VAD” and press .
2. Use / to switch between “Enable” or “Disable” and press .
23