Filter
Top Products
1. The default language of the Digital Music Player is English. Please set the language option first.
2. ID3 tag information has display priority on the screen of the Digital Music Player. You can modify the
ID3 tag by using Windows Media Player or Winamp.
3. If the ID3 tag is empty, just the file name will be displayed on the screen.
Cannot enter the RECORD Mode
To make sure the recorded file will not be lost, two safety mechanisms are provided.
1. If the remaining battery capacity is less than 10%, you cannot enter the RECORD Mode.
2. During recording, if the remaining battery capacity goes below 10% the Digital Music Player will
automatically save the recording.
Track playback sounds intermittent
Plug the earphones into the earphones jack again to make sure they are properly connected.
Digital Music Player Powers OFF automatically
The Digital Music Player
features a SLEEP Mode, which acts as a Power Saving feature. You can preset your
Digital Music Player to Power OFF automatically after 15, 30, or 60 minutes. Please refer to the “Sleep Timer”
section of this manual.
Digital Music Player just isn’t working properly
If your Digital Music Player ever stops working properly, or locks up, try Powering it ON and OFF a few times,
if this does not correct the problem you can reset the Digital Music Player by pressing and holding the “Reset”
button for 3 to 5 seconds.
Cannot find the file that was just copied to the Digital Music Player
Re-copy the file and refer to the “Disconnecting from a Computer” section to remove the Digital Music
Player after the copy process is completed.
A File that was just deleted still appears
Re-delete the file and refer to the “Disconnecting from a Computer” section to remove the Digital Music
Player after the delete process is completed.
Digital Music Player cannot operate after it was formatted in Windows®
Formatting the Digital Music Player using the “Quick Format” or “Full Format” option in Windows
®
destroys the
default format of the Digital Music Player. To retrieve the default format, visit http://www.transcendusa.com
and download a Firmware Update for your Digital Music Player.
How do I find out what Windows Media Player version I am using?
1. Open your Windows Media Player program.
2. Click on the “Help” menu and select the “About Windows Media Player” option.
3. The version of your Windows Media Player will be displayed on the computer screen.
Cannot listen to DRM music on my MP650?
1. The MP650 only supports WMA-DRM10 protected music files, is this the file type you are using?
2. Did you use the MTP “Music Transfer Protocol” to transfer music to the MP650?
Lyrics Sync: Why can’t I see the words of the song I am listening to?
40