Filter
Top Products
35
Introduction
Connections
Basic setup
6
Cable input
Press
/ to select, then press ENTER.
If you select “TUNER”, you will go to step 7.
If you select “Line 1”, you will go to step 8.
7
Tuning channel for the cable box
Press
/ to select, then press ENTER.
8
Read the instructions and observe the
diagram. Confirm that the G-LINK
®
cable and
its wand is properly installed. (
page 25)
If OK, press ENTER.
(Continued)
Your DVD Recorder has more than one input jack. To operate properly with your
cable box, the TV Guide On Screen system needs to know which one your cable
box is plugged into. You may have to look at the back of your DVD Recorder
if you are unsure, as an incorrect selection will result in a blue or snowy screen while
watching TV.
Please indicate which DVD Recorder input the cable box is
plugged into.
STEP 2: Configuring for Cable
TUNER
Line 1
To operate properly with your cable box, the TV Guide On Screen system needs to
know the channel your DVD Recorder is on when using the cable box. The most
commonly used output channel is 03. Please consult your cable box provider if you are
unsure, as an incorrect selection will result in a blue or snowy screen while
watching TV.
What is your DVD Recorder tuned to when using the cable box?
STEP 2: Configuring for Cable
Ch 2
Ch 3
Ch 4
ENTER
ENTER
ENTER
RD-XS35SU/SC_Inst_E_p29-43 06.1.18, 1:26 PM35