Filter
Top Products
21
10.6. Tilting the Enclosure Downward
The lower Line Array speaker, excluding the subwoofer, can be tilted downward with the addition of SR-TP12
Tilt Joint Plates. SR-TP12 Tilt Joint Plates make it possible to set wider angles than can be achieved using the
supplied Joint Plates. Replace the lowermost Line Array speaker’s Joint Plates with the Tilt Joint Plates, then
assemble the system.
Joined view with sub-woofer
Tilt angle (Vertical facing angle) can be adjusted
in the range of 0 degree to 15 degrees.
Joined view with rigging frame
Tilt angle (Vertical facing angle) can be adjusted
in the range of 10 degrees to 15 degrees.
Tilt joint plate
Tilt joint plate
For assembling, refer to the previous “10-3. Mounting the Enclosure to the Rigging Frame” when joining to the
rigging frame, and “9 Flying, 9-4. Joining Enclosures” when joining to the sub-woofer.
For precautions when stacking, refer to the previous “10-5, Notes on Stacking”.
SR-TP12 Tilt Joint Plate
Tilt angle (Vertical facing angle) table
When using the supplied
joint plate
When using the optional tilt
joint plate
When joining the joint plate
with rigging frame
When joining the joint plate
with sub-woofer
0 – 5 degrees
in 1 degree units
Same as above
10 degrees – 15 degrees
in 1 degree units
0 degree – 15 degrees
in 1 degree units