Filter
Top Products
16
9.5. Notes on Flying
•
Check to confirm that the suspension wires, belts, construction of the
ceiling, etc are strong enough to withstand the speaker load.
•
Tighten each joint bolt to 300-350 kg·cm of torque securely.Be sure to
use the joint bolts supplied with the speaker and the Rigging Frame.
•
Up to 8 Line Array speakers can be arranged in flying configuration
per one Rigging Frame. The Subwoofer is counted as 1.5 pieces. No
more than 8 speakers can be arranged in flying configuration.
WARNING
• Fly the assembled system vertically from at least at
two points on the left and right sides.
Center of
gravity position
• Use a suspension point that provides the desired
downward angle. The downward angle increases
as the suspension point is moved backward.
Anti-swing guy wires
• Add anti-swing guy wires as needed. Take care not
to apply the enclosure’s weight on the guy wires.