Filter
Top Products
17
• Only the SR-A12SWP or SR-A12LWP Line Array speaker can be installed outdoors. There is no Subwoofer
available to be installed outdoors.
• WP type speaker features the water protection construction (IPX4), however install it under roofs, eaves, or
other locations not directly exposed to rain or snow.
• Install the speaker so that its air hole is positioned downward, causing the horn face to the right as shown
below.
Notes on Outdoor Installation
Air Hole
• The installation angle of the speaker’s top panel must be between 0 degree from the horizontal axis and up
to 50 degrees downward.
50 degrees
Horizontal axis:
0 degree
• Use the SR-RF12WP Rigging Frame.
• Never suspend the SR-RF12WP Rigging Frame with wires. Be sure to fix it securely to the constructions
with mounting hardware.
• When permanently installing the speaker outdoors, inspect it periodically.
•
In case of outdoor installation, follow the notes mentioned below.
WARNING