Filter
Top Products
13
8.6. Pole Mounting (F-1000BTWP and F-1000WTWP only)
To mount the speaker on a pole with diameter of 10 – 34 cm, use the
supplied wall bracket, joint bracket, and speaker bracket in combination
with the optional YS-60B Pole Band.
Speaker coverage angles can be adjusted in the horizontal and vertical
direction*.
* Horizontal: Max. 90º, Vertical: Max. 45º downward
[Installation example]
1
2
2
3
4
6
Speaker unit
Speaker (rear)
Machine screw
M5 x 20 (with plain
washer and spring
washer)
Joint bracket
YS-60B (option)
Wall bracket
Fixing bolt M5 x 60
Speaker bracket
[Speaker bracket mounting position]
Hexagon bolt M6 x 12
(with plain washer
and spring washer)
Note
Set the speaker in a vertical
orientation, then attach the bracket
so that the rear-mounted terminal
cover is positioned above the
mount.
Step 1. Attach the wall bracket to a pole using the YS-60B.
YS-60B YS-60B
Joint bracket
Wall bracket
[Left-facing orientation]
[Right-facing orientation]
Arrow label
Joint bracket
Wall bracket
Arrow label
• Arrow label orientation (Viewed from top of brackets)