Filter
Top Products
Sleeping to the Radio Using the Timer
Note: For more information about playing the radio, see the Listening to the Radio section of this manual.
1. Press the
»
Radio On/Sleep Button twice to enter the sleep mode.
2. Continue pressing the ᕡ On/Sleep Button to select a 90-, 60-, 30-, or 15-minute sleep time. When the
display shows the desired sleep time, stop pressing the button. The sleep timer setting remains active for
approximately ten seconds before returning to the standard clock display. The Sleep Indicator will appear,
showing that the radio timer has been activated.
3. Select a radio station using the º Radio Band Button and the ¾ Memory Set Buttons.
4. Press the ¶ Sleep Volume Button to adjust the sleep volume to a comfortable level without affecting the
alarm volume. The Sleep Volume Indicator will show the current sleep volume level. Turning the · Volume
Thumbwheel will also adjust the sleep volume.
5. The radio will play for the programmed sleep time and then shut off. To check how much sleep time is
remaining, press the
»
Radio On/Sleep Button once.
6. To turn off the radio before the sleep time has elapsed, press the
³
Off/Reset Button.
Antenna Information and Adjustment
FM – Extend the FM wire antenna to its full length and vary the direction to its strongest signal.
AM – The AM bar antenna is located inside the cabinet. Rotate the unit until you find the strongest AM signal.
Last Station Memory
The tuner always remembers the last station selected before the radio was switched off, and automatically selects
the station again when the radio is turned on.
11