Filter
Top Products
Listening and Sleeping to the Radio
Listening to the Radio
1. Press the 8 Radio On/Sleep Button once to turn the radio on. The Radio Power Indicator will appear at the top
of the display.
Note: If the 8 Radio On/Sleep Button is pressed more than once, the unit will enter the sleep mode. See the Sleeping
to the Radio with Timer section for more information about this feature.
2. Slide the N Radio Band Switch to AM or FM.
3. Rotate the P Radio Tuning Thumbwheel to select a radio station.
4. Rotate the O Volume Thumbwheel to adjust the volume level.
5. Press the 6 Off/Alarm Reset Button to turn the radio off.
Antenna Information and Adjustment
FM – Extend FM wire antenna to its full length and vary the direction to its strongest signal.
AM – The AM bar antenna is located inside the cabinet. Rotate the unit until you find the strongest AM signal.
Sleeping to the Radio with Timer
1. Following the above instructions to select a radio station.
2. Press the 8 Radio On/Sleep Button twice to enter the sleep mode.
3. Continue pressing the 8 Radio On/Sleep Button to select a 90-, 60-, 30-, or 15-minutes sleep timer. The Sleep Timer
appears in the bottom-left corner of the display.
4. The Sleep Volume Indicator will appear, showing that the timer has been activated. Press the 9 Sleep Volume
Button to adjust the sleep volume to a comfortable level. This will not affect the alarm volume. Turning the O Volume
Thumbwheel also adjusts the sleep volume, though this affects the alarm volume.
5. The radio will play for the programmed sleep time and then shut off. To turn off the radio before the sleep time has
elapsed, press the 6 Off/Alarm Reset Button.
Listening and Sleeping to the AUX-IN Device
1. Connect your MP3, Discman or other device into the AUX Jack which located on the left of the unit with mini plug cord.
2. Slide the Radio Band Switch to AUX. Press the Radio On/Sleep Button once to turn the unit on or keep pressing the
button for sleep operation. Please see Listening and Sleeping to the Radio for detail.
3. Turn on the external device and adjust the device output level or the Volume Thumbwheel to adjust the volume level.
4. Press the Off/Alarm Reset Button to turn the unit off.
CAUTION: When no longer listening to music from the AUX-IN Device, be sure to slide the Radio Band Switch back to
AM or FM position when setting the clock to wake to radio.
8