Filter
Top Products
11
Sleeping to the Radio Using the Timer
Note: For more information about playing the radio, see the Listening to the Radio section of this manual.
1. Press the
N
Power/Sleep Button twice to enter the sleep mode.
2. Continue pressing the N Power/Sleep Button to select a 90-, 60-, 30-, or 15-minute sleep time. When the display
shows the desired sleep time, stop pressing the button. The sleep timer setting remains active for approximately ten
seconds before returning to the standard clock display. The Sleep Indicator will appear, showing that the radio timer
has been activated.
3. Select a radio station using the L Mode/DST Button and the M Memory Set Buttons.
4. Press the K Sleep Volume Button to adjust the sleep volume to a comfortable level without affecting the alarm volume.
The Sleep Volume Indicator will show the current sleep volume level. Turning the O Volume Thumbwheel will also
adjust the sleep volume.
5. The radio will play for the programmed sleep time and then shut off. To check how much sleep time is remaining, press
the N Power/Sleep Button once.
6. To turn off the radio before the sleep time has elapsed, press the
3
Off/Reset Button.
Sleeping to Nature Sounds with Timer
1. Press the N Power/Sleep Button twice to enter the sleep mode. This sets the sleep timer to the 90-minute setting.
The sleep timer setting remains active for approximately ten seconds before returning to the standard display. The
Sleep Indicator will be visible in the LCD display.
2. Continue pressing the N Power/Sleep Button to select a 90-, 60-, 30-, or 15-minute sleep timer.
3. Press the L Mode/DST Button then
1
Reverse or 6 Forward Button to choose from the four nature sounds.
4. Press the K Sleep Volume Button to find a comfortable sleep volume level. The Sleep Volume Indicator on the
display shows the sleep volume level. Adjusting the sleep volume will not affect the alarm volume.
5. Press the 3 Off/Reset Button to turn off the nature sounds before the sleep time has elapsed.
Note: To see the number of minutes remaining on the sleep timer, press the N Power/Sleep Button once. The display
will show the Sleep Time for approximately ten seconds before returning to the normal mode.