Filter
Top Products
Auto-Set and Manual Time and Date Settings
Auto-Set Time and Date Settings
This model is equipped with the Auto-Set feature, meaning that the time and date settings
have been programmed at the factory and will already be set when you first plug the model
in. Auto-Set will automatically adjust the time and date settings for daylight-saving time
and leap years. Auto-Set is programmed for Eastern Standard Time; if you do not live in
this time zone, you can easily switch the setting to one of six other time zones.
1. To change your time zone setting, press the ƹ Time Zone Button. The current Auto-
Set Time Zone in the upper-right-hand corner of the display will flash for approximately
ten seconds, after which the display will revert to the standard clock display.
2. While the Auto-Set Time Zone is flashing, press the ² Tuning/Set Buttons to select
your time zone. The display will show each zone’s current time setting. There are
seven time zones to choose from:
Auto-Set Time Zones
Z-01---------------> Atlantic Standard Time
Z-02---------------> Eastern Standard Time
Z-03---------------> Central Standard Time
Z-04---------------> Mountain Standard Time
Z-05---------------> Pacific Standard Time
Z-06---------------> Alaskan Standard Time
Z-07---------------> Hawaiian Standard Time
3. When you have reached your time zone, press the ƹ Time Zone Button to lock the
setting into place.
Manual Time and Date Settings
1. To change your time setting, press the ¶ Time Set Button so that the clock display
begins flashing.
2. While the display is flashing, press the ² Tuning/Set Buttons to set the time. Hold
a button for a few seconds to advance the time rapidly. Be sure to set the correct
AM/PM time, as shown by the PM Indicator.
3. When you have set the current time, press the ¶ Time Set Button again to return
to the standard display.
4. To change your date setting, press the ¾ Date/7-5-2 Button. The display will show
the calendar setting.
5. The display will show the flashing year. Press the ² Tuning/Set Buttons to set the
current year. When you have selected the year, press the ¾ Date/7-5-2 Button again
and follow the above instructions to set the month, and then the day.
6. After you have set the date, press the ¾ Date/7-5-2 Button again to return to the
standard display.
7