Filter
Top Products
Setting the Clock
1. Press and hold the Time Set Button while pressing the Hour Set Button and the Minute Set
Button. Be sure to set the correct AM/PM time, shown by the display's PM Indicator.
2. After setting the time, release the Time Set Button.
Operating the Alarm
Setting the Alarm
1. To set the wake time, press and hold the Alarm Set/Reset Button while pressing the Hour Set
Button and the Minute Set Button. Be sure to set the correct AM/PM wake time, shown by the
display's PM Indicator. Release the Alarm Set/Reset Button.
2. To select the wake sound and activate the alarm, slide the Function Switch to the “Radio” or “Buzzer”
position. (See the Listening to the Radio section for instructions on setting the radio station and volume.)
The Alarm Indicator on the display will light.
NOTE: The buzzer alarm is a “Gentle Wake” alarm, meaning that the volume will rise as time passes.
Turning off the Alarm
1. When the alarm sounds, press the Alarm Set/Reset Button to turn the alarm off and reset it for the
same time on the following day. To turn the alarm off completely, slide the Function Switch to the
“Off” position, so that the Alarm Indicator no longer appears on the display.
2. To activate the snooze feature, press the Snooze/Sleep Off Button. The alarm will shut off for nine
minutes before sounding again. This can be repeated several times during the two-hour cycle.
3. If it is not turned off, the alarm will sound for an hour before stopping. As long as the Alarm Indicator
appears on the display, the alarm will sound at the set time.
Adjusting the Display Backlight
• This alarm clock radio features an adjustable display brightness, with dim and bright settings. To select a
setting, slide the Dimmer Switch to the “Hi” or “Lo“ position.
5