Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
This unit has been designed and manufactured to assure your personal safety. Improper use can result
in potential electrical shock or fire hazards. Please read all the safety and operating instructions carefully
before installation and use. Keep these instructions handy for future reference. Take special note, adhere
to all warning, and always follow the instructions on the unit and in the instructions and service manuals.
1. Water and Moisture - The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
2. Ventilation - The unit should be situated so that its location or position does not interfere with
its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface
that may block ventilation openings. Also, it should not be placed in a built-in installation, such as
a bookcase or cabinet that may impede the flow of air through the ventilation openings.
3. Heat - The unit should be situated away from heat sources such as radiators, heat registers, stoves
or other appliances (including amplifiers) that produce heat.
4. Power Sources - The unit should be connected to a power supply only of the type described in
the operating instructions or as marked on the appliance.
5. Grounding or Polarization - This product is equipped with a polarized alternating current line
plug (a plug having one blade wider than the other). As a safety feature this plug will fit into the
power outlet only one way. If you are unable to fit the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
6. Power-Cord Protection - Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them. It is always best to have a clear
area from where the cord exits the unit to where it is plugged into an AC outlet.
7. Cleaning - Unplug this product from the well outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
8. Non-Use Periods – The power cord of the unit should be unplugged from the outlet when it is
to be left unused for a long period of time.
9. Objects and Liquid Entry - Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
10. Attachments - Do not use attachments not recommended by the product manufacturer as they
may cause hazards.
11. Lightning - For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lightning and power-line
surges.
12. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
13.
Damage Require Service - The unit should be serviced by qualified service personnel when:
A. The power supply cord or plug has been damaged.
B. Objects have fallen into or liquid has been spilled into the enclosure.
C. The unit has been exposed to rain.
D. The unit has been dropped or the enclosure damaged.
E. The unit does not appear to operate normally or exhibits a marked change in performance.
14. Servicing - The user should not attempt to service the unit beyond that described in the user’s
operating instructions. All other servicing should be referred to qualified service personnel.
15. Safety Check - Upon completion of any service or repairs to this product, ask the service telchnician
to perform safety checks to determine that the product is in proper operating condition.
16. Antenna - Do not connect to an external antenna.
A Consumer Guide to Product Safety
12
3
FCC Information
This device complies with part 15 of the FCC Rules. Operation
is subject to the condition that this device does not cause
harmful interference.
Note: The manufacturer is not responsible for any radio or TV
interference cause by unauthorized modifications to this
equipment. Such modification could void the user’s authority
to operate the equipment.
CAUTION: To prevent electric shock, match wide blade of
plug to wide slot. Fully insert.
ATTENTION: Pour éviter les choc électriques. Introduire la
lame la plus large de la fiche dans la borne correspondante
de la prises et pousser jusqu’au fond.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead in an equilateral triangle
is intended to alert the user of the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended
to alert the user of the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
The symbols above are located at the bottom of the cabinet.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
Installation and Maintenance
Installation
1. Remove the unit and all packing materials from the carton.You should save the packing
materials in case unit needs to be returned for service. If you do not wish to save the
materials, please dispose of them properly.
2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight,
and away from sources of dust, dirt, heat, water, moisture, vibration, and strong
magnetic fields.
3. After activating the backup (see below) and reading the Maintenance notes, plug the
AC cord into an outlet.
"Sure Alarm" Battery Backup Installation
It is recommended that 2 “AA” batteries be installed into the unit, as directed below, to
activate the “Sure Alarm” battery backup feature. In the event that the AC power cord
is disconnected or a power failure or other interruption occurs, the “Sure Alarm” system
will maintain clock and alarm settings for the life of the batteries, ensuring that the alarm
will sound at the set time (Note: while operating on battery power, all set alarms will sound
as a buzzer). When power is restored, the clock will cease using battery power, and will
again operate on AC power. The Battery Low Indicator flashes when there is not enough
power to run the backup.
1. Use a Phillips screwdriver to remove the battery
compartment door.
2. Install 2 “AA” batteries (alkaline batteries are
recommended for longer life) into the battery
compartment, making sure that the + and – polarities
match up with the diagram printed inside the
compartment.
3. Close the battery compartment door and tighten the
screw. Gently return the clock radio to its upright
position.
Maintenance
1.
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
2. Protect your furniture when placing your unit on a natural wood and lacquered finish.
A cloth or other protective material should be placed between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents, such as Benzine, thinner or similar materials can mar the surface of
the case.
4. If the unit is not to be used for a prolonged period, such as a month or longer, remove
the batteries to prevent possible corrosion. Should the battery compartment become
corroded or dirty, clean the compartment thoroughly and replace the batteries.
Limited 90-Day Warranty Information
Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI
Technologies), warrants this product to be free from defects in workmanship and materials,
under normal use and conditions, for a period of 90 days from the date of original purchase.
Should service be required by reason of any defect or malfunction during the warranty period,
SDI Technologies will repair or, at its discretion, replace this product without charge (except
for a $10.00 charge for handling, packing, return UPS/postage, and insurance). This decision
is subject to verification of the defect or malfunction upon delivery of this product to the
Factory Service Center listed below. The product must include proof of purchase, including
date of purchase. The fee for service after the warranty period or without proof of purchase
is $30.00.
Before returning this product for service, please first replace the batteries (if applicable) with
fresh ones, as exhausted or defective batteries are the most common cause of problems
encountered.
If service is still required:
1. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date
of purchase.
3. Enclose a check or money order payable to the order of SDI Technologies, Inc. for the sum
of $10.00 (or $30.00 if after the warranty period or without proof of purchase).
4. Send the unit prepaid to the Factory Service Center listed below:
Consumer Repair Department
SDI Technologies Inc.
Timex Audio Products Division
1330 Goodyear Drive
El Paso TX 79936-6420
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence, misuse
or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked
or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if
applicable); (iv) the cost of shipping this product to the Factory Service Center and its return
to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product subsequent to the original purchaser. Any applicable implied warranties are
also limited to 90 days, and SDI Technologies will not be liable for consequential damages.
(Some states do not allow limitations on implied warranties or exclusion of consequential
damages, so these restrictions may not apply to you.) This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
© 2007 SDI Technologies, Inc. All rights reserved
TIMEX is a registered trademark of Timex Corporation the United States and other countries
T1233-122107-1 Printed in China
T1233BA I/B_Front Color: Black Dec 21, 07.
Battery Compartment
1
2
3
Model T1233
For additional information, online
registration, and exclusive special
offers please visit our website:
www.timexaudio.com
Auto-Set
Digital Tuning
Alarm Clock Radio