Filter
Top Products
Operating the Alarm and Snooze Features
1. Set the alarm time and volume as described on Page 3.
2. Set the Alarm Mode Switch to “On.” The Alarm Icon will
appear in the lower-left-hand corner of the clock display,
indicating that the alarm has been set and will sound at the
time selected.
Note: The alarm will continue to sound until it is shut off, or for
a maximum of two hours. As long as the Alarm Mode Switch
is set to “On,” the alarm will sound at the set time every 24 hours.
3. After the alarm sounds, press the Alarm Set/Reset Button
to turn off the alarm while automatically resetting it for the
following day.
4. To turn off the alarm without automatically setting it for the
following day, slide the Alarm Mode switch to “Off.” Even
if the Alarm Set/Reset Button was pressed, setting the
Alarm Mode Switch to “Off” will turn off the alarm.
5. To use the snooze feature, press the Snooze Button. The
alarm will turn off for approximately nine minutes before
sounding again. You may repeat this process several times
during the two-hour alarm cycle.
Operating the Dimmer
Use the Dimmer Switch to set the display to either a High or
Low brightness setting.
4