Filter
Top Products
4
THE DIGITAL CD CLOCK RADIO
Turn to adjust to the desired wake-up volume.
Setting Wake Station
a. Press RADIO ON/BAND to select FM/MW and press
TUNING/TIME DN or UP to tune to your desired station.
b. Press MEMO SET to enter preset mode and
c. Press MEMO RECALL repeatedly to select Alarm Memo “PAL”
(11th preset station).
d. Press MEMO SET to confirm your selection.
Setting Wake to Radio
3
4
2
Press AL.1 repeatedly until indicator flashes on the display.
1
Set wake time. (Refer to “Setting Wake Time)
Press OFF to turn off the unit.
5
• If no WAKE STATION is set, the wake station will stay at your last
listening station.
• When setting AL2, follow the same procedure described above.
THE DIGITAL CD CLOCK RADIO
You can choose to wake to Radio , CD or tone .
Setting Wake to Tone
Smart Design
Once you set the wake time, e.g.
AL1, wake to tone indicator
lights on the display.
or
To change to another wake mode (e.g. from
CD to radio), simply press WK1 or WK2 to
scroll through wake options.
Press AL.1 to change to wake 1 tone mode.
Press AL.2 to change to wake 2 tone mode.
Tip:Tip:
Tip:Tip:
Tip:
1. With the
GRADUWAKEGRADUWAKE
GRADUWAKEGRADUWAKE
GRADUWAKE
feature, the alarm tone volume will increase gradually
to its maximum in about 30 to 45 seconds.
2. You cannot adjust the volume level of the alarm tone.
Smart Wake Up System
• If the alarm sounds when you are listening to music with headphones,
both the headphone and the unit will sound the alarm simultanenously.
1
1
To change to another wake mode (e.g. from
CD to radio), simply press AL.1 or AL.2 to
scroll through wake options.
5
EN
RR550CD EN rev.1 9/10/02, 6:00 PM8-9